Search Courses Results

The course is structured to provide the student with updated and enhanced information on the duties and responsibilities of a security guard.
What you need to bring with you:

• A picture ID (Must be either government issued or school issued)
• A copy of your 16 Hour On-the-Job training completion card
• Your Social Security Number
• Payment (cash, credit card, money order ONLY)
• No. 2 pencil and notebook

This training will provide the student with detailed information on the duties and responsibilities of a security guard.

What you need to bring with you:

• A picture ID (Must be either government issued or school issued)
• Your Social Security Number
• Payment (cash, credit card, money order ONLY)
• No. 2 pencil and notebook

This general introductory course is the initial training required for individuals seeking to obtain a Security Guard Registration Card, and ultimately become employed as security guards in NY State. This 8-hour course provides students with a general overview of the duties and responsibilities of a security guard.

What you need to bring with you:

• A picture ID (Must be either government issued or school issued)
• Your Social Security Number
• Payment (cash, credit card, money order ONLY)
• No. 2 pencil and notebook

Individuals who complete this course are eligible to receive a 10% reduction in the base rate of your auto and motorcycle insurance premiums and can be eligible to reduce as many as 4 points off your New York driver’s license.

The DMV computer system automatically applies the point reduction when your course completion is added to your record. If your record shows any convictions and the points they carry, a notation will be added that you completed the course and a reduction of up to 4 points has been applied.

This course includes applicable New York state traffic laws that help drivers use safer driving techniques to avoid and prevent accidents.

This safety training includes a combination of formal classroom instruction, demonstrations and practical exercises performed by the trainee, and an evaluation of the operator’s performance.

Regulations discussed in this course are ASME B30.5, ASME B30.9, and OSHA 29 CFR Part 1926.1400. This course includes topics such as basic rigging principles, rigging component identification, mathematical calculations, sling selection, rigging inspection, wire rope and chain design, and proper rigging techniques.

The Safety T-Strap Training is a 2 hour course for workers who use Safety T-Straps at the work site.

The Confined Space Awareness course is designed to educate students’ working in the vicinity of confined spaces on key safety hazards, methods of controlling those hazards, elements of confined space programs, emergency procedures and training requirements. Students will become familiar with examples of confined spaces and associated hazards found in both general industry and construction worksites.

Please note that this training does not meet OSHA’s site-specific confined space training requirements. It is intended to serve only as a basic awareness course for students that may work around confined spaces and is NOT intended for those workers who are required to enter a confined space.

The Confined Space Operations course is designed to educate students in the safe practices and responsibilities of the entrant, entry attendant, and supervisor when working with confined spaces. Key topics include general requirements of the OSHA standard, employer’s responsibility to individuals working in confined spaces, confined space recognition, requirements for entry, atmospheric hazards, physical hazards, personal protective equipment, and regulatory requirements.

This training meets OSHA Guidelines for First Aid Programs and combines lecture, interactive video demonstration and hands-on training to teach participants lifesaving skills. In this course, attendees will learn how to recognize and provide basic treatment for medical conditions like cardiac arrest, stroke, seizures, allergic reactions, asthma, and shock. They will also learn how to perform CPR and care for breathing and cardiac emergencies. This course teaches students how to recognize and treat major bleeding, neck injuries, head injuries, broken bones, cuts and bruises.

This is an awareness-level course only and does not qualify the student to OPERATE a mobile elevating work platform. 

Mobile Elevating Work Platforms (MEWP) are machines/devices intended for moving persons, tools, and materials to a working position, consisting of at least a work platform with controls, an extending structure, and a chassis. The most common examples of MEWPs include Articulating Boom Lifts, Scissor Lifts, Vertical Lifts.

MEWP is a device that enables access to hard-to-reach places by lifting a platform into the air. These devices give workers temporary access to otherwise inaccessible locations. The devices are easy to use and are typically safer to use than ladders and scaffolds. These devices are usually powered by electricity, gas, pneumatic, or hydraulic systems that power a series of supports, lifting the work platform. The purpose of the MEWP Awareness class is to review and explain basic safety rules associated with the use, operation, and inspection of MEWP units. The course curriculum includes updated ANSI A.92 Standard requirements for Mobile Elevating Work Platforms that came to life on June 1st of 2020. This awareness course is designed to help workers avoid accidents and injuries while working on or around MEWPs.

Please note that this session does not meet OSHA requirements for aerial lift operators training which must be provided by a qualified person and include specific criteria listed under ANSI 92.24 Standard.

This course is available in-person (on-site) or in a hybrid format where students must first successfully complete a fully online component and schedule a hands-on component to be conducted in-person (on-site).

Mobile Elevating Work Platforms (MEWP) are machines/devices intended for moving persons, tools, and materials to a working position, consisting of at least a work platform with controls, an extending structure, and a chassis. The most common examples of MEWPs include Articulating Boom Lifts, Scissor Lifts, Vertical Lifts.

MEWP is a device that enables access to hard-to-reach places by lifting a platform into the air. These devices give workers temporary access to otherwise inaccessible locations. The devices are easy to use and are typically safer to use than ladders and scaffolds. These devices are usually powered by electricity, gas, pneumatic, or hydraulic systems that power a series of supports, lifting the work platform. The purpose of this training is to provide students with general instructions regarding the inspection, application, and operation of aerial platforms, including recognition and avoidance of hazards associated with their operation. Students will develop the competency needed to operate MEWPs safely while also complying with the laws governing their operation.

The combination of classroom theory training and practical assessment aims to reduce the risks related to MEWP operation by teaching the fundamentals of safe operating procedures.

In order to successfully complete this training, all participants must pass a practical (hands-on) assessment on the specified equipment at the client/employer’s facility.

Pricing

Pricing for this course is determined by the number of students and the type(s) of equipment they are being trained on. Please click the Onsite Training request button or contact us at info@tscta.com for pricing details.

During this 4-hour course students will be introduced to Federal and New York State policies, procedures and standards. Training will review general work zone safety principles covered in the Manual on Uniform Traffic Control Devices (MUTCD) book, with concentration on recognition and prevent of hazardous conditions, and the topics discussed in this course provide a thorough understanding of the proper signals and safe flagging techniques specific to New York regulations, flagging procedures and proper use of required equipment, and how to coordinate traffic movement through the work zone. Students will have an opportunity to review flagging skills using hands-on training and classroom activities.

This course will refresh the participant’s knowledge of how to properly perform lead-safe practices and how to successfully implement them.

This EPA approved course explains how to comply with the new RRP Rule. This course will teach students lead-safe work practices & how to successfully implement them.

The purpose of this awareness training is to provide workers with background information on asbestos in workplace, the dangers of asbestos fibers in buildings, methods of recognizing and preventing exposure to asbestos as well as how to comply with OSHA’s asbestos safety standards.

In this seminar, students will learn the information presented to employees through the written mediums of labels and safety data sheets, and will learn how to apply this information in their workplace.

Following OSHA standards for lead in construction, attendees will learn what is required to prevent exposure to lead in the construction industry. This course includes an overview of Lead Paint, Hazards and OSHA Regulations.

The course will review the fundamentals of Silica and respirable crystalline silica, basic health hazards and risks related to exposure, PPE, engineering controls and safe work practices.

The 2-Hour Silica Hazard Awareness Seminar is appropriate for individuals who may be exposed to respirable crystalline silica in the course of construction activities. Occupational exposure occurs when cutting, sawing, drilling, and crushing of concrete, brick, ceramic tiles, rock, and stone products. Occupational exposure also occurs in operations that process or use large quantities of sand, such as foundries and the glass, pottery and concrete products industries.

Additionally, per OSHA 1926.1153, effective September 23, 2017 (delayed from original enforcement date of June 23, 2017), the training will cover the new permissible exposure limits, specific requirements for exposing controls, competent person, and training and record keeping. We’ve taken the time to break down the new regulations to make sure you’re protected and in compliance!